ESP EZ-WF Installationsanleitung PDF herunterladen (Seite 21)

NOTE: Do not allow product to become damp or wet while rolled in sealed bag

Do not set product directly on wet or uncured concrete.

WARNING: Although ESP LOW-E Insulation Products are all fire tested to ASTM and/or NFPA standards; it is

recommended that they or any insulation material should not be exposed to open flame or other

ignition sources of sufficient intensity during shipment, storage or installation.

CAUTION: Aluminum is an electrical conductor. Please use caution when working around electrical sources

including overhead power lines. Carefully inspect electrical junction boxes and check for frayed

wires before beginning installation

Note: ESP Class-A White is a versatile product for many applications and industries.

ESP LOW-E CLASS-A WHITE INSULATION

PRODUCT CODES*: 4EFWT, 6EFWT(trimmed), 4EFWS, 6EFWS(staple flange), 4EFWZ, 6EFWZ(ez seal)

PRODUCT DIMENSIONS & DESCRIPTION*

One side scrimless aluminum foil, one side scrimless white foil, laminated to polyethylene foam .

Edges can be trimmed, with staple flange or with EZ-Seal self taped flange feature.

WIDTH**: 4’, 6’ respectively

LENGTH**: 125’ (stock size 4’width) 84’ (stock size 6’ width)

R-Value*** : R-11.74 down R-8.58 up R-7.6 horizontal

PERM RATING: ASTM E-96 0.008

FULL SCALE FIRE TEST: NFPA-286 Passed

EMITTANCE: 0.03

* This label refers to the Class-A White line of insulation products supplied by ESP, Inc. and includes information on different widths and

attachment features of the Class-A White line.

Refer to thermal label affixed to the roll of insulation f

** Additional widths and lengths are available upon request and approval by ESP, Inc.

*** R-value results were calculated by GeoScience and were determined from 0.75” airspace and includes air film resistance.

Specific R-values for specific applications can be obtained from installation manual at www.low-e.com or by contacting ESP , Inc.

at 1-800-289-5693

(1/4” nominal thickness)

FLAME AND SMOKE: ASTM E-84 Flame spread <25 Smoke developed <50

ASTM C-1371

or information on specific product purchased.

Environmentally Safe Products, Inc.

313 W. Golden Ln. New Oxford, PA 17350

Toll Free: 1-800-289-5693 Fax: 717-624-7089

www low-e.com E-mail: [email protected]

Class A White

Reduces your carbon footprint.

Scan Code To

See Install Guide

“R means resistance to heat flow. The higher the R-value, the greater the insulating power.” “To get the marked R-Value, it is essential that this insulation be

installed properly. If you do it yourself, get instructions and follow them carefully. Instructions do not come with this package.” To obtain installation instructions

visit www.low-e.com or call 1-800-289-5693. Like a radiant barrier, Low-E products also block 97% of radiant heat.

“ESP, Inc strives to provide the most accurate R-value data possible. The R-values set forth in this document are the reflection of a combination of industry standard

testing and conscientious calculation. However, these numbers, even within specific applications, can fluctuate due to the multiple variables that influence R-value."

ESP Low-E insulation products are covered under a limited warranty. For full details on our warranty please see our website, www.Low-E.com.

19.

YOUR EVERYDAY INSULATION SOLUTION

1 2 ... 16 17 18 19 20 21 22 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

ESP EZ-WF Installationsanleitung Seite 21

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Empfänger ESP EZ-WF