ESP EZ-WF Installationsanleitung PDF herunterladen (Seite 14)

ESP LOW-E INSULATION

PRODUCT CODES*: 4LFLT, 6LFLT(trimmed), 4LFLS, 6LFLS(staple flange), 4LMLT (4’ only)

PRODUCT DIMENSIONS & DESCRIPTION*

Double sided scrimmed aluminum foil laminated to polyethylene foam ( .

Edges can be trimmed or with staple flange

WIDTH**: 4’, 6’ respectively

LENGTH**: 125’ (stock size 4’width) 84’ (stock size 6’ width)

R-Value*** : R-11 down R-7.55 up R-7.75 horizontal

PERM RATING: ASTM E-96 0.008

FLAME AND SMOKE: ASTM E-84 Flame spread <25 Smoke developed <50

FULL SCALE FIRE TEST: NFPA-286 Passed

EMITTANCE: ASTM C-1371 0.03

* This label refers to the ESP Low-E line of insulation products supplied by ESP, Inc. and includes information on different widths and

attachment features of the ESP Low-E line. For information on specific product purchased refer to thermal label affixed to the roll of insulation

** Additional widths and lengths are available upon request and approval by ESP, Inc.

*** R-value results are obtained from ASTM C236.

Specific R-values for specific applications can be obtained from Install Guide at www.low-e.com or by contacting ESP, Inc. at 1-800-289-5693

1/4”or 1/8” nominal thickness)

Environmentally Safe Products, Inc.

313 W. Golden Ln. New Oxford, PA 17350

Toll Free: 1-800-289-5693 Fax: 717-624-7089

www low-e.com E-mail: [email protected]

REFLECTIVE INSULATION

Reduces your carbon footprint.

Scan code to see

Install Guide

NOTE: Do not allow product to become damp or wet while rolled in sealed bag

Do not set product directly on wet or uncured concrete.

WARNING: Although ESP LOW-E Insulation Products are all fire tested to ASTM and/or NFPA standards; it is

recommended that they or any insulation material should not be exposed to open flame or other

ignition sources of sufficient intensity during shipment, storage or installation.

CAUTION: Aluminum is an electrical conductor. Please use caution when working around electrical sources

including overhead power lines. Carefully inspect electrical junction boxes and check for frayed

wires before beginning installation

ESP

Low-E Insulation is a versatile product for many applications and industries.

“R means resistance to heat flow. The higher the R-value, the greater the insulating power.” “To get the marked R-Value, it is essential that this insulation be

installed properly. If you do it yourself, get instructions and follow them carefully. Instructions do not come with this package.” To obtain installation instructions

visit www.low-e.com or call 1-800-289-5693. Like a radiant barrier, Low-E products also block 97% of radiant heat.

“ESP, Inc strives to provide the most accurate R-value

data possible. The R-values set forth in this document

are the reflection of a combination of industry standard

testing and conscientious calculation. However, these

numbers, even within specific applications, can

fluctuate due to the multiple variables that influence

R-value."

12.

YOUR EVERYDAY INSULATION SOLUTION

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

ESP EZ-WF Installationsanleitung Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Empfänger ESP EZ-WF